Amsoil oil-tech.com

Home Contact Us Racing My Experiences with Amsoil My Blog Opportunites What's New Performance Tests Motorcycle Oil Comparison Why Synthetic Oil?

 

KVS 412 I-R Natural Gas Fueled Natural Gas Compressor

Natural Gas separator
ASM 0w-20

Synthetic SAE 40 Stationary Natural Gas Engine Oil

AMSOIL Synthetic Stationary Natural Gas Engine Oil (ANGS) delivers continuous protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifies it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, eliminating the need for seasonal oil changes.

Product Code: ANGS05-ea

buy now header Buy ANGS ANGS Details right below ANGS data sheet

Synthetic Stationary Natural Gas
Engine Oil SAE (20W) 40

Formulated to Provide Top Efficiency in Stationary
Engines Fueled by Natural Gas

AMSOIL Synthetic Stationary Natural Gas Engine Oil delivers superior protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifes it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, reducing the need for seasonal oil changes.

ANGS Synthetic Stationary Natural Gas Powered Engine Oil

Controls Wear
AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low sulfated ash to minimize carbon deposits and port blockage, resulting in reduced maintenance and extended equipment life. Advanced anti-wear and antiscuff protection helps control valve recession and wear on piston rings, cylinder liners and bearings during continuous severe-service operation in stationary natural gas engines.

Keeps Engines Clean
AMSOIL Synthetic Stationary Natural Gas Engine Oil is engineered with premium base oils and additives to improve engine lubrication by keeping oil passages cleaner. Its balanced formula allows for a high total base number (TBN) to protect against corrosion while meeting low ash requirements.

Controls Nitration
Nitration is a common concern in natural gas engines and can cause oil to thicken, reducing operational efficiency. AMSOIL Synthetic Stationary Natural Gas Engine Oil is naturally resistant to nitration, delivering maximum protection in natural gas engines.

ANGS viscosity over 6,800 hours

Protects Emission Systems
AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low zinc and phosphorus levels to prolong the life of emission catalyst systems without sacrificing wear protection.

Delivers Continuous Protection
AMSOIL Stationary Natural Gas Engine Oil is a long life oil that has demonstrated extended drain interval capabilities when carefully monitored by an oil analysis program. When extending oil drain intervals, change the oil filter at the engine manufacturer’s recommended interval.

 

.

 

ANGS TAN TBN tracking over 6,800 hours

Aggrand Natural Fertilizers Altrum Wellness Products TRICO wiper blades offer superior performance WIX air, oil and racing filters Donaldson endurance and heavy-duty filters MANN Filters Mothers Polishes, Waxes and Cleaners Oil Analyzers, Inc. Oil analysis services for automotive, fleet and industrial applications NGK spark plugs and spark plug wire sets

TYPICAL TECHNICAL PROPERTIES

AMSOIL Synthetic Stationary Natural Gas Engine Oil (ANGS)

Sulfated Ash Content (ASTM D-874)
0.48
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
14.2
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
97.5
Viscosity Index (AASTM D-2270)
149
Noack Volatility, % weight loss (g/100g) (ASTM D-5800)
3.9
Flash Point °C (°F) (ASTM D-92)
254 (489)
Fire Point °C (°F) (ASTM D-92)
282 (540)
Pour Point °C (°F) (ASTM D-97)
-40 (-40)
Four Ball Wear Test (40 kgf, 75°C, 1200 rpm, 1 hr.) Scar, mm (ASTM D-4172)
0.35
High-Temperature/High-Shear Viscosity @ 150°C
1.4 X 106 S-1, cP (ASTM D-5481)
4.3
TBN
5.6

APPLICATIONS
AMSOIL Synthetic Stationary Natural Gas Engine Oil is recommended for use in stationary four-stroke and two-stroke engines that require low-ash (<0.50%) engine oil and are fueled by natural gas.

AMSOIL Synthetic Stationary Natural Gas Engine Oil should not be used in vehicular applications that run on propane or natural gas.

 

COMPATIBILITY
AMSOIL Synthetic Stationary Natural Gas Engine Oil is compatible with conventional petroleum oils and other synthetic lubricants; however, mixing AMSOIL Stationary Engine Oil with other oils will shorten the oil’s life expectancy and reduce the performance benefits.

Aftermarket oil additives are not recommended for use with AMSOIL Synthetic Stationary Natural Gas Engine Oil.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children.

Don’t pollute. Return used oil to collection centers. For AMSOIL warranty information, visit www.amsoil.com.

 

 

Aggrand Natural Fertilizers Altrum Wellness Products WIX air, oil and racing filters Donaldson endurance and heavy-duty filters MANN Filters Oil Analyzers, Inc. Oil analysis services for automotive, fleet and industrial applications


 

Amsoil 40 year logo

Free Shipping

Amsoil Preferred Customers SAVE BIG

Amsoil Factory Catalog - Download NOW
Amsoil Vehicle Lookup Guides

My Amsoil Garage

Amsoil Product Categories
























 

Product Lookup Guides

Auto and Light Truck

PowerSports

Small Engine

Motorcycle

TRICO Heavy-Duty

 

Cross Reference Guides

Master Filter Cross

NGK Plugs and Wires Cross

More Information

Shipping Cost

Limited Warranty

MyAmsoilGarage™

EQUIPMENT
Automotive & Light Truck
ATV & UTV
Classic Vehicles
Off Road & 4x4
Class 8 Trucks
Boats & PWC
Diesel Motors
Dirt Bikes
Imports & Tuners
Motorcycles
Motor Homes
Snowmobiles

 

Buy ASM ASM Details ASM data sheet