Synthetic SAE 40 Stationary Natural Gas Engine Oil
AMSOIL Synthetic Stationary Natural Gas Engine Oil (ANGS) delivers continuous protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifies it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, eliminating the need for seasonal oil changes.
Product Code: ANGS05-ea
Synthetic Stationary Natural Gas
Engine Oil SAE (20W) 40
Formulated to Provide Top Efficiency in Stationary
Engines Fueled by Natural Gas
AMSOIL Synthetic Stationary Natural Gas Engine Oil delivers superior
protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifes it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, reducing the need for seasonal oil changes.
Controls Wear
AMSOIL Synthetic Stationary Natural Gas Engine Oil is
formulated with low sulfated ash to minimize carbon deposits
and port blockage, resulting in reduced maintenance
and extended equipment life. Advanced anti-wear and antiscuff
protection helps control valve recession and wear on
piston rings, cylinder liners and bearings during continuous
severe-service operation in stationary natural gas engines.
Keeps Engines Clean
AMSOIL Synthetic Stationary Natural Gas Engine Oil
is engineered with premium base oils and additives to
improve engine lubrication by keeping oil passages cleaner.
Its balanced formula allows for a high total base number
(TBN) to protect against corrosion while meeting low ash
requirements.
Controls Nitration
Nitration is a common concern in natural gas engines and
can cause oil to thicken, reducing operational efficiency.
AMSOIL Synthetic Stationary Natural Gas Engine Oil is
naturally resistant to nitration, delivering maximum protection
in natural gas engines.
Protects Emission Systems
AMSOIL Synthetic Stationary Natural Gas Engine Oil is
formulated with low zinc and phosphorus levels to prolong
the life of emission catalyst systems without sacrificing wear
protection.
Delivers Continuous Protection
AMSOIL Stationary Natural Gas Engine Oil is a long life oil
that has demonstrated extended drain interval capabilities
when carefully monitored by an oil analysis program. When
extending oil drain intervals, change the oil filter at the
engine manufacturer’s recommended interval.
.
TYPICAL
TECHNICAL PROPERTIES
AMSOIL Synthetic Stationary Natural Gas Engine Oil (ANGS)
Sulfated Ash Content
(ASTM D-874)
0.48
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445)
14.2
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445)
97.5
Viscosity
Index (AASTM D-2270)
149
Noack
Volatility, % weight loss (g/100g) (ASTM D-5800)
3.9
Flash Point °C (°F)
(ASTM D-92)
254 (489)
Fire
Point °C (°F) (ASTM D-92)
282
(540)
Pour
Point °C (°F) (ASTM D-97)
-40
(-40)
Four
Ball Wear Test (40
kgf, 75°C, 1200 rpm, 1 hr.) Scar,
mm (ASTM D-4172)
APPLICATIONS
AMSOIL Synthetic Stationary Natural Gas Engine Oil is
recommended for use in stationary four-stroke and two-stroke
engines that require low-ash (<0.50%) engine oil and are fueled
by natural gas.
AMSOIL Synthetic Stationary Natural Gas Engine Oil should
not be used in vehicular applications that run on propane or
natural gas.
COMPATIBILITY AMSOIL Synthetic Stationary Natural Gas Engine Oil is compatible
with conventional petroleum oils and other synthetic
lubricants; however, mixing AMSOIL Stationary Engine Oil with
other oils will shorten the oil’s life expectancy and reduce the
performance benefits.
Aftermarket oil additives are not recommended for use with
AMSOIL Synthetic Stationary Natural Gas Engine Oil.
HEALTH & SAFETY
This product is not expected to cause health concerns when
used for the intended application and according to the recommendations
in the Material Safety Data Sheet (MSDS). An
MSDS is available at www.amsoil.com or upon
request at (715) 392-7101. Keep Out of Reach of Children.
Don’t pollute. Return used oil to collection centers.
For AMSOIL warranty information, visit www.amsoil.com.